The problem of get predictions

fastai
1

I try to use the following code to get the predictions. However, the labels is not consistent to the predictions. What happens it?
preds = learner.get_preds(ds_type=DatasetType.Test, n_batch=8)
preds
The results are as followings:
[tensor([[0.0019, 0.9981],
[0.0023, 0.9977],
[0.0099, 0.9901],
…,
[0.7362, 0.2638],
[0.0027, 0.9973],
[0.0025, 0.9975]]),
tensor([0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0])]

1 Like
2

Hi,

Excuse me because I don’t know the answer for your question, but I have a question for you if you can help me. In fact, I have a question about FastAi lib but I don’t know how to publish a question, can you give some hints?

Thanks in advance!

3

I have also recently experienced this problem, and was about to create a post for it.

In my case, it is after I had previously saved my model to disk, and was now using the workflow below to generate predictions for a new data set:

learner = load_learner(path, fname, test=<my-new-data>)
preds, y = learner.get_preds(ds_type=DatasetType.Test)
``
4

As it has been stated in multiple topics on this forum and is written in red in the docs, test set is unlabeled in fastai.
So your 0s aren’t labels, they’re just 0s because the function has to return preds,targets when you pass the validation or the training set.
The test set is to quickly get predictions on new data. If you want to validate on a second set, see here how to proceed.

5

get_preds [source][test]

get_preds ( model : Module , dl : DataLoader , pbar : Union [ MasterBar , ProgressBar , NoneType ]= None , cb_handler : Optional [ CallbackHandler ]= None , activ : Module = None , loss_func : OptLossFunc = None , n_batch : Optional [ int ]= None ) → List [ Tensor ]

Tuple of predictions and targets, and optional losses (if loss_func ) using dl , max batches n_batch .

As these docs mention, the return value is prediction, targets. Test set doesn’t have this information present. Target is only in training and validation datasets.

6

I see. Thank you for your reply.

7

Thank you!

8

Hi! What’s your question?